COMPACTFLAT SN2

Aerocompact – angle profile 40x40x1mm with hole+slotted hole, for cross connect+ballastsupport – 706009-1150

In stock

4.80
angle profile 40 x 40 x 1 mm with hole and slotted hole, for cross connection and ballast support, connectable to 706010-1150, matching module length 1801-2125 mm / 70.87 – 83.66 », length 1150 mm / 45.28 », steel DX51D, coating AZ150
>> Depending on conditions of storing the steel profiles, and the weather, the surface may change visually. This does not impair the functioning and will thus not constitute claims with regard to warranty and liability on Aerocompact’s side. <<

Aerocompact – angle profile 42x42x1mm with hole+slotted hole, for cross connect+ballastsupport – 706010-1150

In stock

3.89
angle profile 42 x 42 x 1 mm with hole and slotted hole, for cross connection and ballast support, connectable to 706009-1150, matching module length 1801-2125 mm / 70.87 – 83.66 », length 1150 mm / 45.28 », steel DX51D, coating AZ150
>> Depending on conditions of storing the steel profiles, and the weather, the surface may change visually. This does not impair the functioning and will thus not constitute claims with regard to warranty and liability on Aerocompact’s side. <<

Aerocompact – elevated flat roof installations, module installation landscape, tilt angle 10° – 731024

In stock

7.70
elevated flat roof installations, module installation landscape, tilt angle 10°, clamping on short or long side, aluminium EN AW-6063 T66, stainless steel, EPDM

Aerocompact – elevated flat roof installations, module, landscape, tilt angle 5° or 10° SN2 – 731012

In stock

3.90
elevated flat roof installations, module installation landscape, tilt angle 5° or 10°, clamping on short or long side, aluminium EN AW-6063 T66, stainless steel, EPDM

Aerocompact – for BR1980 base rail, length 150 mm, centering dent in the middle – 739050

In stock

1.08
for BR1980 base rail, length 150 mm, centering dent in the middle, 1 notch on each side, external dimensions cross section 22 x 15 mm, S355J0 zinc-plated

Aerocompact – Length 1980 mm / 78.0  », cross section 102 x 24 mm, 3 upper side fixation slots – 706308-1980

In stock

23.10
Length 1980 mm / 78.0  », cross section 102 x 24 mm, 3 fixation slots on upper side, 3 pcs Protection Pads 230x102x7mm glued on, aluminium EN AW-6063 T66, polyester needle felt, 1700 g/m2

Aerocompact – Length 450 mm / 17.7  », cross section 102 x 24 mm, 3 upper side fixation slots – 706308-450

In stock

11.58
Length 450 mm / 17.7  », cross section 102 x 24 mm, 3 fixation slots on upper side, 2 pcs Protection Pads 230x102x7mm glued on, aluminium EN AW-6063 T66, polyester needle felt, 1700 g/m2

Aerocompact – Length 5800 mm / 228.3  », cross section 102 x 24 mm, 3 upper side fixation slot – 706308-5800

In stock

63.79
Length 5800 mm / 228.3  », cross section 102 x 24 mm, 3 fixation slots on upper side, 8 pcs Protection Pads 230x102x7mm glued on, aluminium EN AW-6063 T66, polyester needle felt, 1700 g/m2

Aerocompact – steel sheet 0.6mm coated, punched, bended, matching module length 1550-1800 mm – 706101-1850

In stock

12.36
steel sheet 0.6mm coated, punched, bended, matching module length 1550-1800 mm / 61.0-70.9 », length 1850 mm / 72.8 », tilt 10°, steel DX51D, coating AZ185
>> Depending on conditions of storing the steel sheets, and the weather, the surface may change visually. This does not impair the functioning and will thus not constitute claims with regard to warranty and liability on Aerocompact’s side. <<